- EMC design to Meet CISPR11, GROUP2    CLASS B, - Power can be easily controlled by selecting    up/down switch and displayed in digital    figured watts. - Acoustic signs of HF activation by different    acoustic tones.(enable to tune the volume) - Cutting/coagulation/bipolar coagulation can    be differed by acoustic alarm sign and visual    alarm lamp. - Bipolar Automatic Switching Function - Two of hand piece in remote.(selectable tting/coagulation) - Enable to cutting/coagulation by foot switch(possible to use in Laparoscopy) - Enable to control the Neutral electrode alarm/cutting/coagulation volume - The micro processor enables to have directness of output and more precise power. - Safety circuit design from neutral plate    Automatic acoustic warning alarm signal & visual alarm lamp to prevent skin burn/electric    shock in case of improper contact with neutral plate

TOLERANCE : ? 20%

	DT400	DT300	CREST FACTORS	REMARKS
PURE	400 W at 500 ohm	300 W at 500 ohm	1.3	non-modulated
BLEND 1	300 W at 300 ohm	260 W at 300 ohm	1.6	a little modulated
BLEND 2	250 W at 300 ohm	220 W at 300 ohm	1.9	medium-degree modulated
BLEND 3	200 W at 300 ohm	180 W at 300 ohm	2.2	strongly-modulated
COAGULATION	150 W at 300 ohm	140 W at 300 ohm	2.8	very strongly-modulated
SPRAY	100 W at 500 ohm	70 W at 700 ohm	5.5	extremely strongly-modulated
BIPOLAR	80 W at 100 ohm	80 W at 100 ohm		non-modulated

Model	DT400/300
Power supply	110[V~] / 220[V~] ? 10% 8.0[A] / 4.0[A]
Power frequency	50 / 60 [Hz]
Power consumption	850 [VA]
Protection class	1, CF
Nominal frequency	400 [KHz] ? 10[%]
Modulated frequency	33 [KHz] ? 10[%]
Leakage current	Do not exceed 0.5 [mA]
Environmental condition	- Ambient temperature : 10 [? ] ~ 40 [? ] - Relative humidity : 30 [%] ~ 85 [%] - Barometric pressure : 700 [mbar] ~ 1060[mbar]
Storage condition	- Ambient temperature : 10 [? ] ~ 60 [? ] - Relative humidity : 30 [%] ~ 95 [%] - Barometric pressure : 700 [mbar] ~ 1060 [mbar]

RF-output trequency
	Pure cut Blend Blend 2 Blend 3 Contact coagulation Spray coagulation	400[Hz] (? 10[%]) continuous wave 400[Hz] (? 10[%]) at 75[%] duty cycle 400[Hz] (? 10[%]) at 55[%] duty cycle 400[Hz] (? 10[%]) at 45[%] duty cycle 400[Hz] (? 10[%]) at 30[%] duty cycle 400[Hz] (? 10[%]) at 13[%] duty cycle
Dimensions (HxWxD : mm) 150x380x450
Weight : 20 [kg]

? Specifications and design can be changed for improvement without notice.

REUSABLE TWIN BUTTON HANDLE WITH CABLE FORCEP CABLE FORCEP(18CM SHARP, STAINLESS) PATIENT PLATE WITH CABLE CONTAINER LANCET ELECTRODE, STR, 50MM LANCET ELECTRODE, STR. 70MM VERY FINE NEEDLE LOOP ELECTRODE, 50 BALL ELECTRODE, 40 NEEDLE ELECTRODE DOUBLE FOOT SWITCH SINGLE FOOT SWITCH OPERATING MANUAL UNIPOLAR HANDLE WITH CABLE

- 1 - - 1 - - 1 - - 1 - - 1 - - 1 - - 1 - - 1 - - 1 - - 1 - - 1 - - 1 - - 1 - - 1 - - 1 -